ChinaB2BClub

Ceramic Tableware Sourcing Guide: Porcelain, Stoneware and Bone China

Written by

in

Ceramic tableware covers porcelain, bone china, stoneware and earthenware, and each body has different strength, weight and food-contact requirements. For most export programmes the decision comes down to body type, glaze and decoration method, firing consistency and packing. This guide explains how the main options differ, which points to verify before sampling, and what to ask a Chinese manufacturer so that quotations can be compared on equal terms.

Buying guide

China produces ceramic tableware in several long-established clusters, including Chaozhou and Liling for daily-use porcelain, Dehua for fine white porcelain, Tangshan for bone china, and Zibo for stoneware and technical ceramics. Factories differ in whether they buy blanks or control clay preparation, glazing and firing in-house, which affects consistency and the minimum order they can accept.

Terminology is not standardised. 'Porcelain', 'fine china' and 'bone china' are used loosely in catalogues, and 'ceramic' can mean anything from high-fired porcelain to low-fired earthenware. Buyers should confirm the body, firing temperature and decoration process in writing rather than relying on the product name alone.

Main ceramic bodies compared

Bone ash content and firing temperature vary by factory; ask for the actual body specification rather than a generic label.

Body Typical use What to verify
Porcelain Everyday plates, bowls and cups; high whiteness and translucency Firing temperature, water absorption, chip resistance at the rim
Bone china Fine dining, hotel and gift sets; warm white and light weight Bone ash content, actual strength, packing for thin walls
Stoneware Casual dining, rustic glazes and oven-to-table items Water absorption, thermal shock resistance, glaze durability
Earthenware Decorative and lower-cost tableware; terracotta and coloured bodies Water absorption, glaze fit, suitability for dishwasher use
Vitrified or high-alumina Commercial catering where strength matters Water absorption against the claimed level, impact test results

What to check before you sample

  1. Body and firingAsk for the body class, firing temperature and water absorption. High-fired porcelain and stoneware are normally denser and more chip-resistant than earthenware.
  2. Glaze and food contactConfirm that the glaze and decoration meet the destination market's food-contact rules, and ask for a test report from a recognised laboratory for the exact colour and decoration you will order.
  3. Decoration methodIn-glaze and under-glaze decoration sit beneath the glaze; on-glaze decals sit on top. The method affects durability, dishwasher resistance and the colours that are possible.
  4. Size and weight consistencyAsk for tolerance ranges for diameter, height, capacity and weight, then check a production sample rather than only the approval sample.
  5. Thermal and mechanical testsRequest results for thermal shock, dishwasher cycles, microwave use if claimed, and rim impact. Claims should be supported by test reports, not catalogue icons.
  6. Packing and drop testCeramic losses usually happen in transit. Confirm inner packing, carton grade, drop-test standard and the loading plan for the container.

Common sourcing mistakes

  • Accepting 'bone china' or 'porcelain' as a description without a written body specification.
  • Approving a decorated sample without a food-contact test on that exact glaze and decal combination.
  • Assuming 'dishwasher safe' and 'microwave safe' mean the same thing; they are separate claims with separate tests.
  • Comparing quotations without aligning size, weight, packing and Incoterms.
  • Skipping a pre-shipment inspection on mixed-colour or mixed-size orders, where the risk of substitution is highest.

Selected suppliers in this category

Browse all suppliers in this category →

Frequently asked questions

What is the difference between porcelain and bone china?

Bone china contains bone ash, which gives a warm white colour and allows thinner, lighter walls. Porcelain is made from kaolin, feldspar and quartz and is usually stronger at the same thickness. Both can be suitable for export; the choice depends on the look, weight and price position you need.

Which food-contact tests should I ask for?

It depends on the destination market. Common requirements include lead and cadmium release tests for the glaze and decoration, plus the relevant food-contact framework for the EU, the United States or your own market. Ask for a report that names the exact item, colour and decoration, and keep it with the purchase order.

Can I order a custom shape or decal?

Yes, most factories can develop custom moulds and decals. Mould development normally adds cost and time, and the factory will usually quote a separate tooling charge. Confirm who owns the mould and how it is stored before you pay for it.

What affects the price most?

Body type, weight, decoration method, packing and order quantity have the largest effect. Hand-painted or gold-decorated items cost more than printed decals, and heavy items increase freight. Ask for a breakdown by item rather than a single average price.

How do I check consistency between sample and mass production?

Keep the approved sample, agree measurable tolerances for size, weight and colour, and arrange a pre-shipment inspection against those tolerances. Photograph the approved sample under fixed lighting so colour can be compared.

Is a lower price always a better deal?

No. A lower quotation may use a lighter body, thinner glaze, simpler packing or a different decoration method. Compare the specification line by line, and include the cost of breakage and replacement in your calculation.

Related buying guides

Back to Crafts, Ceramics & Glassware →

This guide is compiled from supplier product records and general category knowledge. Specifications, prices and lead times vary by order; confirm them directly with each supplier.