Stainless steel flatware is specified by steel grade, thickness, weight and finish, and these four variables explain most of the price difference between quotations. Common export grades are 304, 430 and, for demanding environments, 316. This guide explains what each grade means, how thickness and finishing affect the feel of the product, and which checks should be completed before mass production.
Buying guide
Flatware includes forks, knives, spoons and serving pieces. Chinese production is concentrated in Guangdong, particularly around Yangjiang, as well as in Zhejiang and Hebei. Factories may press and polish in-house while buying steel coil from specialist mills, so the grade and thickness of the incoming steel should be confirmed rather than assumed.
An '18/10' label refers to chromium and nickel content, but the label is not a test. Buyers should ask for the mill certificate or a composition test, especially when the order is price-sensitive. Handle construction, whether solid, hollow or welded, also changes weight, balance and durability.
Common flatware grades compared
Knife blades are often a different grade from the handle; specify both.
| Grade | Typical description | What to verify |
|---|---|---|
| 304 (18/8 or 18/10) | General export flatware with good corrosion resistance | Actual nickel content, mill certificate, thickness |
| 430 (18/0) | Lower-cost flatware with magnetic pull | Corrosion performance, intended use, dishwasher exposure |
| 316 | Marine, medical and high-chloride environments | Molybdenum content, price premium, actual need |
| 201 | Low-cost domestic and promotional flatware | Corrosion risk, nickel and manganese content |
| Hollow-handle construction | Knives and heavy-feel forks and spoons | Seam quality, welding, water tightness after washing |
What to check before mass production
- Steel grade evidenceRequest the mill certificate or an independent composition test for the actual production lot.
- Thickness and weightAsk for the gauge in millimetres and the weight per piece. Thicker steel feels more substantial but costs more and increases freight.
- Balance and edge finishCheck that forks and spoons sit comfortably and that edges are smooth under the finger. Sharp edges are a common complaint in low-cost production.
- Surface finishMirror, satin and brushed finishes wear differently. Confirm the finish on the production sample and ask how it is protected during packing.
- Dishwasher testingIf dishwasher-safe is claimed, ask for a cycle test that covers the decoration or coating, not only the steel.
- Packing and set compositionConfirm how sets are counted, how pieces are protected, and whether retail or food-service packing is required.
Common sourcing mistakes
- Accepting '18/10' as a guarantee without a mill certificate or composition test.
- Comparing prices without checking steel thickness; two quotes can look similar but use different gauges.
- Ignoring hollow-handle seams, which can trap water and fail after repeated washing.
- Choosing a decorative coating without a wash test for the intended market.
- Forgetting that knife blades are often a different grade from the handle.
Selected suppliers in this category
Frequently asked questions
What is the difference between 18/10 steel and 304 steel?
18/10 describes approximate chromium and nickel percentages; 304 is the standard grade that normally meets those percentages. The label alone does not prove the composition, so ask for a mill certificate or a test report.
Is 430 steel suitable for export?
It can be suitable for price-sensitive or light-duty ranges, but it has lower corrosion resistance than 304. Confirm how the product will be washed and used, and test accordingly before committing to a large order.
How thick should flatware be?
There is no single answer. Thickness should match the price position and the intended use. Ask for the gauge in millimetres and compare the weight per piece across quotations.
Are PVD-coated colours durable?
PVD coatings are harder than paint or plating, but performance depends on the process and the washing conditions. Ask for abrasion and dishwasher test results for the exact colour.
Can handles be customised?
Yes. Handle shapes can be developed with new tooling, and existing handles can be combined with different finishes. Confirm tooling cost, ownership and lead time.
What causes rust spots on stainless steel?
Stainless steel is stain-resistant, not stain-proof. Rust spots usually come from contamination, low-grade steel, prolonged contact with salt or acid, or damage to the passive layer. Ask the factory about passivation and washing instructions.
Related buying guides
Back to Crafts, Ceramics & Glassware →
This guide is compiled from supplier product records and general category knowledge. Specifications, prices and lead times vary by order; confirm them directly with each supplier.